What are the construction techniques of emulsion p

2022-07-22
  • Detail

Emulsion paint is now a relatively environmentally friendly water-based paint, and it is also the most popular wall decoration method in home decoration. According to the grade difference of emulsion paint itself, there are three kinds of emulsion paint construction processes: high, medium and low. The quality of emulsion paint construction technology is related to whether the wall surface is beautiful in the future, whether it will crack and bubble for a long time. Next, let's learn together

emulsion paint is now a relatively environmentally friendly water-based paint, and it is also the most popular wall decoration method in home decoration. According to the grade difference of emulsion paint itself, there are three kinds of emulsion paint construction processes: high, medium and low. The quality of emulsion paint construction technology is related to whether the wall surface is beautiful in the future, whether it will crack and bubble for a long time. Next, let's learn together

emulsion paint construction process, step 1, base treatment

gypsum powder is used to scrape the bottom of closed parts of circuit pipelines, cement repair parts, cement plastered walls, etc. Make emulsion paint on the plate, first carry out anti cracking treatment, and then seal it with alkyd varnish. The surface of the base course shall be polished and leveled, cleaned, and free of oil, dust, or convex concave phenomenon

emulsion paint construction process, step 2. Fully apply putty twice

the first time shall be fully applied with rubber scraper. It is required that the horizontal scraping is flat, uniform, smooth, dense and flat, and the line corners and edges are neat. Scrape it as thin as possible without missing, and the joint shall not be left with tenon. Be careful not to contaminate the door and window frames and other parts, otherwise it shall be cleaned in time. After the first putty is completely dry, polish it with coarse sandpaper

pay attention to balanced operation, protect edges and corners, and clean them with a brown broom after grinding; The second full puttying method is the same as the first one, but the direction of puttying is perpendicular to the front puttying. Then polish it with coarse sandpaper, otherwise it must be done for the third and fourth times. Use 300W sun lamp to illuminate the side of the wall or ceiling, polish it with coarse sandpaper, and finally polish it with fine sandpaper

emulsion paint construction process, step 3. Sealing paint

if high-grade emulsion paint is used, it needs to be sealed after full putty. Roller coating or spraying can be used. Pay attention to the dry and clean wall surface. The coating should be uniform and cannot be missed

emulsion paint construction process, step 4, brush emulsion paint

brush the first coat of emulsion paint, patch putty, polish and clean up; Brush the second coat of emulsion paint, partially repair, comprehensively inspect, polish and clean up; Brush the third coat of emulsion paint, and the emulsion paint construction process is completed

emulsion paint construction process, step 5, polishing, cleaning

after the wall is dry, polish it with fine sandpaper. After completion, remove the shelter and clean the splashed materials. The emulsion paint construction is completed

I'll introduce the latex paint construction technology here. I hope it can help you. More decoration information is here. Please look forward to it

河南肾病医院

上海男科医院

昆明皮肤病医院

武汉性病医院

Copyright © 2011 JIN SHI